Suggestion for the people making Hovercrafts

[TallgeeseIIII]

i just found the perfet motor for a fan, i have 2 broken cd players and i took the motors out (and got 2 really strong micro motors too ) but i took the main motors that spin the cd out too, well, apparently these motors can handle way more power than they are given by the cd player, i hooked them up to a 9 volt battery while holding them one at a time, each with a cd on them, when one of them got up to speed i was getting more air than some of our fans in the house give and that's from a flat cd! anyway, i touched the side of the cd and i think i got a paper cut! (believe me, these things are strong!) they don't take long to get up to speed either! i have more to add but i'll do that tomorrow.

[TallgeeseIIII]

ok, i got some pics of my findings and some new suggestions, first of all, the steering should be done not with the original magnetic steering, but with 2 motors in the back, and one in the bottom for the air bag, what should happen is have both rear motors on at the same time, and when you press left, the right one should turn off, and vice versa for going right, the two rear motors ahould be in cages, i'm still thinking about how to do that one, but i have examples of this in the following pics.

[TallgeeseIIII]

pic 2

[TallgeeseIIII]

pic 3

[TallgeeseIIII]

this is the bottom fan, see how it isn't shaped like a normal fan blade

[TallgeeseIIII]

here's the two micro motors i found in the cd players

[TallgeeseIIII]

here's the two motors i found in the cd players that would make excellent bottom fan motors