05-27-2004, 09:17 PM
|
 |
It's Really Fast!
|
|
Join Date: Apr 2003
Location: Oradell, NJ
Posts: 1,034
|
|
|
Jshwaa's work
Well, in a word: stunning. I sent my car to him to get some FETs and his regulator installed. I might as well let the cat outta the bag; I'm building a 50 mph xmod. It will consist of 5 li-ons and the aforementioned parts. I would show the FETs, but I glued down my skidplate, so I can't show you that. Also, if your FETs are out the bottom of the car, make a metal skidplate, because mine is also acting as a heatsink.
__________________
Project Bad Brushless:
Mamba 6800+3 li-pos+Mini-X Rx and Tx=Done, but eats tires (RUN TO THE HILLS!)
Just say no to giant sigs.
|
05-27-2004, 09:19 PM
|
|
It's Really Fast!
|
|
Join Date: Apr 2003
Location: Oradell, NJ
Posts: 1,034
|
|
My Skidplate:
I am considering making these, and all they need is some epoxy to attach it to the car. Email me at viperdout@yahoo.com with the subject "Skidplate."
__________________
Project Bad Brushless:
Mamba 6800+3 li-pos+Mini-X Rx and Tx=Done, but eats tires (RUN TO THE HILLS!)
Just say no to giant sigs.
|
05-31-2004, 04:42 PM
|
|
Registered User
|
|
Join Date: Oct 2003
Posts: 98
|
|
|
Viperdout, how much did is cost for the FET upgrade?
__________________
XMOD Yellow Skyline
AWD
Wide Track Bearings
IC-3
Soft Front, Monoshock
Hard Treaded
NML Stage 10, blue Gear
Carbon Fiber Driveshaft
|
05-31-2004, 05:03 PM
|
|
It's Really Fast!
|
|
Join Date: Apr 2003
Location: Oradell, NJ
Posts: 1,034
|
|
I did it all in one shot, so I don't know how much he'd charge for just FETs. Email me at viperdout@yahoo.com .
__________________
Project Bad Brushless:
Mamba 6800+3 li-pos+Mini-X Rx and Tx=Done, but eats tires (RUN TO THE HILLS!)
Just say no to giant sigs.
|
05-31-2004, 10:11 PM
|
 |
got boost?
|
|
Join Date: Oct 2003
Location: Canada,Ontario
Posts: 838
|
|
are you sure 50mph??
because i hit that speed with my nitro, i just clocked it at 46.8mph 4 days ago.
and the thing was screaming......50 mph is very fast.... i don't know if that's possible with x-mod 
i might be wrong..
Adam
__________________
All Wheel Drive=Fun!!!
|
06-01-2004, 06:12 AM
|
|
It's Really Fast!
|
|
Join Date: Apr 2003
Location: Oradell, NJ
Posts: 1,034
|
|
|
Some one has already hit 50. I'm gonna try with 21 volts. I hope It works.
__________________
Project Bad Brushless:
Mamba 6800+3 li-pos+Mini-X Rx and Tx=Done, but eats tires (RUN TO THE HILLS!)
Just say no to giant sigs.
|
06-07-2004, 04:03 PM
|
|
TinyRC Pro
|
|
Join Date: Aug 2003
Posts: 35
|
|
Quote:
viperdout posted
Some one has already hit 50. I'm gonna try with 21 volts. I hope It works.
|
why not push the limits of jshwaa's reg mod and go w/ 25v then?
|
06-07-2004, 04:09 PM
|
|
It's Really Fast!
|
|
Join Date: Apr 2003
Location: Oradell, NJ
Posts: 1,034
|
|
|
Because, the regulator is a 25 volt regulator, and 4.2X6=25.2. Therefore, it exceeds the reg oh so slightly. I also do not want to risk blowing up the whole combo. With the 180, and I am goning to try a blue gear before a 1:1 ratio, I have a lot of options if it does not exceeds 50.
__________________
Project Bad Brushless:
Mamba 6800+3 li-pos+Mini-X Rx and Tx=Done, but eats tires (RUN TO THE HILLS!)
Just say no to giant sigs.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 09:37 PM.
|
|
Linear Mode
