SE battery swap! charging Qs

[mshkttck]

I am about to swap an se battery into a normal ZZ. I will also make a stand alone charger using an extra controller. Would the swapped se battery be able work with the charger's 2 AAAs directly? Should I remove a AAA? Is there anything else I should do or know before I try this? I recently put another zz out of its misery attempting this, and I really dont want to ruin a new one.

thanks for your time

[Azimov]

I am about to swap an se battery into a normal ZZ. I will also make a stand alone charger using an extra controller. Would the swapped se battery be able work with the charger's 2 AAAs directly? Should I remove a AAA? Is there anything else I should do or know before I try this?

You need to use 4 AAAs to charge the SE battery for the time limit built into the charger. Or, you can use two AAAs and charge twice as long.

[mshkttck]

Originally posted by Azimov
You need to use 4 AAAs to charge the SE battery for the time limit built into the charger

I was talking about making a stand alone charger by removing the pcb.

just an idea. i built this out of a zip contoller cap. the led is just for fun and is not needed.also 1 se battery wont give you much of a difference as two 1.2v as well wont last as long, weight balance, i prefer the extra weight in the back, 2.4 internal swap alows it to be really light in the rear, unless mounted perp. to the engine.

and change its size as i am sorry for the hugeness of these pics.

last on sitting on top of my coffe pot just fneeded the black for clarity the red blue buttons in the back have nothing to do with the charger.