TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   Show me the Governor! (http://tinyrc.com/forums/showthread.php?t=7728)

noxorc 01-31-2003 07:03 AM

Show me the Governor!
 
1 Attachment(s)
My Microsizer has terrible range.

Could be the Car, could be the Remote.

I have seen other pictures with a registor as the governor, and when removed has given better range.

I don't see that, or others I have seen, on my remote.

Any help?

shanly 01-31-2003 07:13 AM

you could remove the crippler capaciter in the remote... go to www.questformadness.com , they will show you how to do it

Dorifto! 01-31-2003 07:17 AM

1 Attachment(s)
I think you are reffering to a cripple capaciter. If you dont see one on the controller, maybe you have one on the car itself. I had this on my microsizer sport and after I removed it I had great range.

shanly 01-31-2003 07:44 AM

i also removed the cripple capicot in my car as well, i DID notice notice a change, the remote is what really helped was the remote mod...

noxorc 01-31-2003 09:11 AM

Did the mod
 
I removed the resistor. No difference, at lease nothing obvious.

-Nox

hogjowlz 01-31-2003 09:43 AM

im telling you. a 3rd battery in series in the controller will double your range. in combo with a larger antenna you will notice a big increase. or you can rip things off your circuit board or hope that using neat-o orange wire will magically give you 50foot range.

shocon2k 01-31-2003 03:09 PM

Whats that black box with the ribbon wire coming out of the bottom of your remote?

jei$ 01-31-2003 05:15 PM

hey WTF
is that big black box with blue wires stickin out of it?

redemption 01-31-2003 05:20 PM

I think...that If i read his earlier posts correctly...

it attaches to his serial port (i think) so it can be controlled by his computer...

i think

t-squared 01-31-2003 08:18 PM

earlier post?
http://www.tinyrc.com/forums/showthr...&threadid=6410

shanly 01-31-2003 08:46 PM

:eek: :eek: :eek:

Hatchet_Dan 01-31-2003 09:22 PM

Show me the Governor! Show me the Governor!


heh i had to do it

redemption 01-31-2003 10:21 PM

Quote:

Originally posted by t-squared
earlier post?
http://www.tinyrc.com/forums/showthr...&threadid=6410


yeah...that one

Pojo 01-31-2003 11:06 PM

EDIT 1 : YEA!!! My 500th Post! :D

EDIT 2: For Nox, if any of the info in this post fails, try www.questformadness.com

Hmm, it doesn't appear that you have a cripple capacitator on your controller, but here's a list of stuff you can try instead :D :

1. Undo the antenna knot under the car's PCB.

2. Install brand *spankin* new batteries in the remote, or do the triple-battery controller mod like hog suggested. Note-I'm not sure how to do this, but I'm sure a l33t electronics d00d like you can pull it off.

3. Install a telescopic antenna from RS on your car's remote.

4. Buy some 22awg or higher solid copper cable from RS, and use a bit for a new antenna for your car.

5. Hold the darn thing over your head?

6. Have I run out of ideas?

Well, if none of these suggestions work, and you're abolutely sure that the cripple cap removal on the car did nothing for range, than I suggest you re-solder in the car's crip cap. It will at least help to block out interference from other Bit frequencies. I say this because after removal of my Hiroto's car crip cap, I noticed my 27mhz controller was able to control the 57mhz car. Alas, it's quirks like those that make these little guys so dang fun! :D


All times are GMT -5. The time now is 05:30 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.