what the hell
 

i think i have a problem with my relays. my tin racer goes forwards instead of backwards and backwards instead of forward.
please help pics if possible.
thanks

yo watch ur mouth

now let me help u


1.take out the motor
2.unclip the things on the side holding the 2 mtor pieces together
3.spin it 180%
4.if this doesnt work ur car is messed up
hunter

hey hunter thanks
 

hunter that helped alot.
and i got my new sus and wheel kit off the site jus a few days ago this thing is really cool now.

hunter saves the day again

easy way?
 

Couldn't you just switch the leads on the engine?
I figure re- soldering it would be the simple solution.

its easier just to flip the motor:bdrop: :blift: b16 b24awgm :confused:

I fliped the leads on the one of my car before I found out that you could just turn the motor end bell around.But it is easier to flip and solder the leads.To turn the end bell you have to pry open the motor casing crimps off of the end bell and turn the end bell and then recrimp them with needle nose pliers.A lot more labor involved.

well then i did it differently i used my fingers instead of pliers

I got it now
 

You flip the case so that it will match the rotation of your other motors.... I just noticed that the wire leads go to contacts instead of directly to the motor. That makes sence now.

its mad easy