deataching gears
 

I took apart a broken camera today and ran across some really small plastic gears but i did run across these little gears that you see below but i dont know how to get them off any sugestions?

wow thats a bad pic let me download drivers for my digi cam and take a new one

this should be better

the easiest way of removing the gear on that metal shaft is by using a piece of wood... drill a hole which is the same size as the shaft but not bigger than the gear you are to remove... slid in the shaft into the hole then tap it lightly with a hammer or you could use a visegrip on the other side to pull that shaft off the gear ;).. be carefull

thanks killer