TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   XMODS (http://tinyrc.com/forums/forumdisplay.php?f=124)
-   -   Lenghts (http://tinyrc.com/forums/showthread.php?t=16581)

danny_v_l 12-25-2003 12:13 PM

Lenghts
 
Hey Guys i'm gonna get my second x-mod, and i have seen this around but what are the lengths of the cars like some use the largest seting some use middem some use the short i need one that will fit a 10 size motor and a two cell mod, do u think the supra will fit it?

Bad Company 12-25-2003 12:19 PM

All of the cars use the long setting except the RSX, it uses the middle setting.

maxximum attack 12-25-2003 01:52 PM

1 Attachment(s)
BC,

Can you change the wheelbase to the medium setting without changing the driveshaft? I wanto do this mod, But i have the long chassis setting and this fellow has the middle setting. Do I need a new driveshaft or can I just go ahead and shorten the wheelbase by swapping screw slots?

thanx

maxximum attack 12-25-2003 02:00 PM

1 Attachment(s)
here is the undershot.

Bad Company 12-25-2003 02:31 PM

1 Attachment(s)
You can use the long shaft and change to the middle setting only if you are using the 2WD Rear Drive setup. What you have to do is cut down the front axle retainer? The piece that goes between the wheel axle pins and hold them in place. That piece also keeps the shaft from sliding foreward in the 2WD setup.

You will have to remove the same amount you move the shaft foreward, which would be the distance from the center of the longest screw hole to the center of the center screw hole.

Keep in mind, if you do this, you will not be able to go back the long setting and use that front axle retainer on 2WD, but you can go back to AWD.

maxximum attack 12-25-2003 03:32 PM

So if I wat to have 4WD, I would have to get a new medium sized drive-shaft?

I've seen the driveshafts in CJ's FAQ but can you get them OTC from radioshack.

My, dad I in the states and I can get him to pick up one for me.

Bad Company 12-25-2003 03:37 PM

If you want to change the setting AND have AWD, you will have to buy the correct shaft.

maxximum attack 12-25-2003 03:49 PM

Thanx guy.
Can I get the shafts from RS? If not, How can I get them?

Bad Company 12-25-2003 04:10 PM

You should be able to order them thru the 800 number or thru a store. Look up the part number in CJ's FAQ.

danny_v_l 12-25-2003 09:28 PM

so bc u think i can fit a two aaa cell holder in the car and a 180 motor?, i ask u this because didn't u do a two cell to a supra?

Bad Company 12-25-2003 09:31 PM

If the 180 motor is any bigger than the Xmod motors, you will not be able to without shimming the rear end up on the body.


All times are GMT -5. The time now is 05:30 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.