01-19-2005, 10:18 PM
|
|
Xmodder
|
|
Join Date: Jan 2003
Posts: 185
|
|
Gears grind often.
Hmm, I was driving across my water bed because I was bored, and the car bottomed out for a sec, where all four tires were of the ground, and it rocked to one side so both tires caught. When it hit i heard a grind and the car did a flip, ever since then the gears grind a lot, how could I fix this?
__________________
*Nissan 350z*[COLOR=royal blue]
-Stage 2 red SB hybrid motor (soon to be neo mags, BB can and BB endbell)
-IC-3 800 mAH bats - 4 cell
-AWD
-Blue springs up front, silver in back
-Aluminum locknuts at all four corners
-Locked rear diff for drift action![/color]
|
01-20-2005, 12:57 AM
|
|
Registered User
|
|
Join Date: Aug 2003
Location: Bay Area
Posts: 831
|
|
try screw the motor mount tighter
__________________
RSX...FWD..soft tread F & hard tread R tires..gloss black skyline wheels..crystal clear headlights..euro taillights..4.5 tie rod..lights..red suspension arms..red springs..alloy nuts
white Supra...RWD..doubled rear stock tires..white 5 spoke wheels(from 1st RS upgrade)..lowered..st.2 drift..lights..alloy nuts
350Z...Supra wheels..chrome exhaust tips..lowered..lights..lifted rear with spacers for leveled stance..alloy nuts..body match painted supra wheels
black Skyline...AWD..RSX wheels..lowered..all orange painted silvers..st.2 drift..lights..yellow springs..alloy nuts
67' Camaro...lights..reversed rear wheels..alloy nuts
NSX..RSX wheels..smoked headlight housing..lights..alloy nuts
black Civic...lights..lowered..Skyline clip..black Supra wheels
yellow Skyline, outdoor car..LITHS..AWD - front LSD & locked rear..drift tires or hard tires..dipped 9T st. 2 motor..black chassis, rear upper deck & motor holders..yellow springs...rear monoshock..F&R alloy cups, shafts, and knuckles
F150 mods include fets, 7.4V liths, st1 motor with stock gearing, F&R gpm diffs monster tires, bearings, lift kit and 4WD.
silver Supra on evo chassis, liths, AWD, lowering kit, wide rear stance, st2, bearings, 1.5 TR, F&R gpm knuckles
G35 rolling chassis
H2 rolling chassis
Cobra,rolling chassis
red Supra SOLD
65' Mustang...SOLD
Corvette... SOLD
WRX...SOLD
blue Civic...SOLD
|
01-20-2005, 10:14 PM
|
|
Xmodder
|
|
Join Date: Jan 2003
Posts: 185
|
|
everything is on tight, its the diff gear and the colored gear that came with the motor.
__________________
*Nissan 350z*[COLOR=royal blue]
-Stage 2 red SB hybrid motor (soon to be neo mags, BB can and BB endbell)
-IC-3 800 mAH bats - 4 cell
-AWD
-Blue springs up front, silver in back
-Aluminum locknuts at all four corners
-Locked rear diff for drift action![/color]
|
01-20-2005, 10:19 PM
|
|
TinyRC Pro
|
|
Join Date: Oct 2003
Location: Utah
Posts: 58
|
|
Try shifting the weight towards the back of the motor, so the brass pinion is up from the plastic gear, that should relieve some stress. And if that doesnt work then I would remove the Motor mount that is located in the back and play around with the motor until you stop hearing the grinding noise.
-Ryan
__________________
"Theres no Shame in my Game!"
|
01-22-2005, 03:16 PM
|
TinyRC Pro
|
|
Join Date: Feb 2004
Location: ny
Posts: 75
|
|
yeah the same thing is happening to me. the bevel and the differential grind cause the differential is slidding on the axle. i think im taking it back cause theres some other problems with my xmod. fun while it lasted. later
__________________
xmod:acura nsx
zzmt:bigfoot - motors and tires
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 07:01 AM.
|
|