ok, so i got a drr,
not too happy about the huge receiver...
soooo....took it apart.
esc is a decent size, but the receiver stands to be replaced
with a nice shredder or the like
basically, you see the standard three wire output of the
esc...
those three wires are your standard three wire output for
standard esc's....
so you can just desolder them and solder on a standard
esc plug.
as for the extra line going into the esc that connects
to the section of the receiver marked "batt"
that line basically closes the circuit for the esc.
that line is the line you use to attach an on/off switch.
when you close the circuit between where that wire
attaches to the esc and the middle wire
of the esc output (i forget what color but basically they are at the same location on the esc, just on different sides of the board)
you turn on the esc.
well...
just an fyi...
pics to come soon, if i ever get to it
basically trying to use the esc in my kawada for now....
Threaded Mode
