Used SB magnets...going backwards?

[Exaran]

I took the magnets from a SpinBrush motor and put them into my spare stage 1 drift motor. To me, the power and speed is incredible (dont have enough room to get to speed normally), but there's one problem....When I pull the trigger on the controller It goes in reverse!!!

Did I put the magnets in backwards? Or do the different magnets reverse the polarity of the motor?

Should I try repositioning the magnets, or do i just need to swap the wires to the motor? If i need to rewire, can I just swap the pins in the connector, or will i need to move the capacitors/resistors/etc.?

Thanks for the help