I switched motors on my xmod and there was a piece that was left out. It was a piece from behind the motor, a yellow piece, is this needed?
__________________
*Nissan 350z*[COLOR=royal blue]
-Stage 2 red SB hybrid motor (soon to be neo mags, BB can and BB endbell)
-IC-3 800 mAH bats - 4 cell
-AWD
-Blue springs up front, silver in back
-Aluminum locknuts at all four corners
-Locked rear diff for drift action![/color]
if you have stage 2 motors you don't *NEED* that, because motors fit pretty tight into the heatsink. I put it back in, and it just stays in. I never have to remove it to swap motors. Without it, if you run head-on into something, sometimes the motor will fly out of the heatsink and disconnect from the drivetrain.
Linear Mode
