12-13-2002, 08:13 PM
|
|
|
|
I need help
I just brought my microsizer car and 2.6 motor. The Car works fine with the oringinal but when i put the 2.6 it doesnt work correctly like sometimes it doesnt even go.
Thanks for the help
|
12-13-2002, 08:18 PM
|
 |
Bit Drag Racer
|
|
Join Date: Nov 2002
Location: NJ
Posts: 258
|
|
|
Welcome to the forum,
1. is the motor making clear connection?
2. is you heat sink pushed all of the way down?
3. are your tires fully on the wheels?
4. is there hair on ur axel?
5. What gearing are you using?
6. have you ever opened up the front of your car?
7. is you axel pushed all the way into the slot?
8. is your pinion gear pished far in enough for the gears not to skip?.
__________________
Dont brag about your car being fast because you dont know what micro fast is.
|
12-13-2002, 08:20 PM
|
|
|
|
all they are ok but how do i check the last one and even if i do get it to work its slower the the oringinal
|
12-13-2002, 08:22 PM
|
|
Bit Drag Racer
|
|
Join Date: Nov 2002
Location: NJ
Posts: 258
|
|
|
pinion gear is the black gear on your motor, is it making a clear connection with the gears?
__________________
Dont brag about your car being fast because you dont know what micro fast is.
|
12-13-2002, 08:35 PM
|
|
|
|
its not when i have the 2.6 in it how can i fix it
|
12-13-2002, 08:41 PM
|
|
Bit Drag Racer
|
|
Join Date: Nov 2002
Location: NJ
Posts: 258
|
|
|
just push the pinion gear back further.....onto the motor
__________________
Dont brag about your car being fast because you dont know what micro fast is.
Last edited by TemjinNeo78; 12-13-2002 at 08:49 PM.
|
12-13-2002, 08:50 PM
|
|
Bit Drag Racer
|
|
Join Date: Nov 2002
Location: NJ
Posts: 258
|
|
|
here is an example....
__________________
Dont brag about your car being fast because you dont know what micro fast is.
|
12-13-2002, 08:54 PM
|
|
|
|
thanks its working now but sees slower then the oringal what are the different color motors i have a yellow and orange what are they as far as 2.2 2.6 1.0 what are they thanks
|
12-13-2002, 08:56 PM
|
|
Bit Drag Racer
|
|
Join Date: Nov 2002
Location: NJ
Posts: 258
|
|
alright check to see if the car is on full charge, and perhaps you need new controller batteries. That is a common problem among all rc racers... 
yellow=2.2
orange=2.6
blue=1.0
__________________
Dont brag about your car being fast because you dont know what micro fast is.
Last edited by TemjinNeo78; 12-13-2002 at 09:00 PM.
|
12-13-2002, 09:01 PM
|
|
|
|
i just got the car today its full charge and sometimes it wouldnt go backwards
|
12-13-2002, 09:05 PM
|
|
|
|
but when i pick it up it has no problems
|
12-13-2002, 09:06 PM
|
|
Bit Drag Racer
|
|
Join Date: Nov 2002
Location: NJ
Posts: 258
|
|
The slow backwards driving was a result from the earlier skipping which you fixed, so that shouldnt be a problem anymore, all i can think of is that you have a defective 2.6 motor. Contact hobbico (they have great customer service) and tell them you dilemma. They will gladly replace you motor.  But before you even do that ride around your microsizer and 2.2 if the 2.2 seems to start off the line fast it begins to go slow. Try to test both of these motors and you may notice that the 2.6 will quickly gain its speed.
__________________
Dont brag about your car being fast because you dont know what micro fast is.
|
12-13-2002, 09:08 PM
|
|
|
|
where are u in nj i am in nj too
|
12-13-2002, 09:09 PM
|
|
Bit Drag Racer
|
|
Join Date: Nov 2002
Location: NJ
Posts: 258
|
|
|
..........
__________________
Dont brag about your car being fast because you dont know what micro fast is.
Last edited by TemjinNeo78; 08-24-2005 at 09:43 AM.
|
12-13-2002, 09:13 PM
|
|
|
|
i am in columbus nj near burlington mall when i got the last rc from allied hobbies
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 06:41 AM.
|
|
Linear Mode
