New Hop-Ups! T-Plate, damper...

Here's some new stuff I believe since noone is talking about.

I didn't know this manufacturer but they make nice stuff:
http://lmn-tuningparts.de/

They offer some new H-Plate here: http://lmn-tuningparts.de/listing-th...?xthm=1&ythm=1
And Dampers here:http://lmn-tuningparts.de/listing-th...?xthm=1&ythm=2

Careful there's a mistake about the H-Plate, the one sold alone as "extraweich" meaning extra soft is in fact extra hard, it's not only the design but it's about twice thicker than the set ones.
I got the damper "V1 MM" and it's very low profile, it only has one spring. It comes assembled and is a bit strange like it has an upper damping plate but no upper spring and the screw doesn't fit in the pod(luckily I had spares from the atomic damper), more on this one later.

Here's some new plate again from TRP:
http://www.technicalrp.es/
Here for the plate: http://www.technicalrp.es/catalog/en...o-p-35406.html
I'm posting these cause the hard one is the HARDEST plate available for dnano(except may be the kyosho one, don't know I don't have it) it's alot thicker than any other like PN, Atomic ...
And TRP is selling some LMN stuff cheap, just click on all Dnano sub-menu(This site is a mess).

And some plate and bearings from KM racing:
http://www.km-rc.com/index-2.html
Here's the direct link: http://www.km-rc.com/oscommerce/cata...cPath=34_22_76
I didn't try these but they look cheap, I'll try soon anyway

Now a bit more about the LMN damper V1 MM, it fits on my Enzo
I removed the useless upper damping plate to allow more damping.
Switch for smaller screw for the pod, LMN screws have big heads, taking away some more damping(if needed).
And last I put the bushing from front wheels as spacers for the plate screwing on the battery holder, again to allow more damping .
I believe that without those spacers I add and with "small head" screws it will probably fit some lower profile cars than the Enzo, well there's another damper called "V1 Upsidedown" looks like even better suited for low profile body.

Here's pics of the damper out of the box and on the Enzo after tweaking: