View Single Post
  #7  
Old 07-06-2002, 09:19 AM
dansambodies dansambodies is offline
TinyRC Pro
 
Join Date: Jul 2002
Posts: 21
Lightbulb ok answers to questions

Ok here is the deal. They attatch with velcro to the clear cover on the top of the car, fuzzy side on the car, brilly side on the body's roof. The only mod needed on the car is a thin smear of CA glue (available at any hobby store) reinforcing the clear cover to the body, so it does not pull off when you take the body off.

Now first off in a case where you need to take the clear cover off (in my experience the death nail for the car) you can take it off by breaking that glue seal with a razor blade (did this myself to test it) with no damage as all you are gluing is the sides and not with anything more than a dab of glue anyway.

You need to use clear rc body paint (also available at any hobby store). I tried all different kinds of paint and this is the only stuff that held up for any amount of time. The cost of the paint is like 1.99 per bottle, and Ca depends on the bottle size but Im thinking you can get a small bottle for like under 5 bucks. Prices at your hobby store may vary.

hope this answered all your questions

dan
Reply With Quote