[scottyboyfun]

2 Solutions-

1.If u have a Tomy chassis, the best chassis there is, they always steer wel, then u could transplant the pcb into this. ONLY if you are good at soldering, i mean very good.

2.Fix it.--

I would open up the steering compartment, have a good look,

-is the steering spring ok?
-are both the steering spring legs in their slots?
-do the spring legs easily come out of their slots?
-is the magnet securely glued in?
MAKE SURE THAT THE MAGNET IS NOT TURNED AROUND
IF u do find it is loose, it would be a good idea to mark one side of the magnet with a pen, so you know which side it originally was on.

-is the white tab on the bottom of the car for correcting the steering loose? it could be moving on its own.

-when the car is assembled, and the steering goes to one side, has the steering knuckle slipped out of the plastic T peice thing?

-make sure the steering wires are not touching the pcb where they shouldn't be.

-I cant think of ne thing else at the mo!

-when it happens, carefully open up the steering and have a good look to see if ne thing looks wrong.