Ive figured out how to make a wild charg controller, both boost and action,
It is really simple,
You have to solder a wire to PIN --TURBO-- on the transmitter, then solder this to a switch, then solder the other point on the switch to ground.
When u press the switch, it will boost, and when u press ur action, it will do that!
This could be the way tiberius did his, Im not sure if this will work, but it is definitely worth trying.
I havent got a WILD controller to do it with tho.
ONLY DO THIS IF THE CHIP BELOW HAS THE SAME NO.
LOOK AT THIS PAGE
http://members.aol.com/rchelicam/microszr/microszr.htm