|
Well here is the answer to what you need!
You need 3 simple things that will be useful for most hobbies:
1 exacto knife
1 masking tape (I like and use Tamyia's tape)
1 Spray Can
Stick the tape well,rub it all over the edges,then go with the knife through the lines you want to cut, remove excess tape, spray one good layer(not too thick),let it dry for a day,spray second layer,let it dry...
You are done!
(What I also suggest is Clear coat in the end and primer before paint but if money is an issue don't care about them...)
Never dry mask nor paint with a brush!
Brush only for detailing!
|