|
If I can find an RX board that uses the RX2C IC chip, I'm confident that I can mod it into a booster machine. Pin 9 on the IC needs to be grounded to enable the boost function on rev. C of the chips. I have a rev. B (like you) on a 40MHz board from a cheap (and very crappy) clone. Soldered the RX into a Microsizer chassis for the 6th frequency. Rev. B (and earlier) of these chipsets do not incorprate the booster function present in rev. C. The turbo function of these earlier chips does provide an additional output. But, I have not use of it at the present time.
|