View Single Post
  #9  
Old 08-21-2002, 03:39 PM
ssstraub ssstraub is offline
TinyRC Pro
 
Join Date: Jul 2002
Location: Milwaukee, WI
Posts: 54
Send a message via ICQ to ssstraub Send a message via AIM to ssstraub Send a message via Yahoo to ssstraub
Here is what they are made of. (translated from German)

Batteries:
It concerns here 4 cells nickel cadmium Akkus, those together
4.8 V result in. The 50mAh cells has a mass of 3,6g/Zelle; Diameter = 10mm; Length = 15,5mm; Interior reconditions 55mOhm

Receiver:
Here 40 MHz concern the JMP Rx5-2.3 receiver 5 channel of FM
Here some data:
Current supply: 3.1 - 15 V;
Dimensions: 27 x 14 x 6 mm;
Range: approx. 150 m;
Sensitivity: +/- 15kHz
Weight: 2,3g with JST connections

Automatic Controller:
It concerns a self-'s building automatic controller of another model construction amateur here.
It carries out to 400mA with 4,8V and is only 10x15 mm largely

Motor:
concerns a bell anchor GEAR MOTOR 181 here: 1
With winkelgetriebe and two waves. Operating voltage 0,5-6V,
Power input 45 - 70 mA, outlet number of revolutions: 2 V = 35 Upm, 3 V = 65 Upm, 6 V = 130 Upm, weight 14 g,
Mass: (L x B x H) 38 x 9 x 15 mm, transmission shafts 2 Ø.
By development of the transmissions - intermediate stage, can do one Reduction of 13,4: 1 to be selected.

Servo:
A pico concerns 5,4 servo here
Here some data:
Weight: 5.4 g; Floating time (5V, 40°): 0.09 seconds;
Torque (5V): 4.8 Ncm; Plug: JST Micro;
Mass: 15.5 x 23 x 9,5mm;

Pictures are here
Click on the left to see different pics of the parts.
Reply With Quote