|
I don't have a diagram but here goes pretty simple.
Each steering coil has 2 wires coming off of it.
1 wire from each coil solders together with the red pos. wire AT the PCB.
The 2 remaining wires (one from each coil) gets soldered to its respected spot on the PCB with a L or R.
I strongly recommend using tweezers to handle the wires.
__________________
1999 Super Modified Zinc Yellow SVT Mustang ZZ
Bit PCB MOD
It's a sleeper! hehehehe
M/S Mitsubishi EVO Lancer w/modified clone motor
M/S Nissan Skyline
M/S Honda S2000
|