|
Steering wires
I soldered the steering wires back to the pcb. Now it only turns alittle each way. The way I have it now is: one wire from each of the steering coils soldered together on the pcb. The other two wires criss-cross each other to the other two points on the pcb. I'm thinking that I need to take the two wires that go to the center and put them straight(not crossed)to the outer two points. Then take the crossed ones and put them together to the center. I'm going to try it tomorrow and see how it goes, but I'll look here for any info first. Thanks, Mike.
|