[RCP-Tracks, Inc]

Philip said they would be available in two weeks. He will have a variety of deg's available. I am sure the shop will have them here, as soon as they are available.

For my driving level, the mini-96 is perfect as is for the dNaNo. A good addition would be to add some large radius inside turns, chicanes and 45's to your layout and your set. For the beginner RC driver, adding an expansion tile to the turns would be better, if you have the room. I will have some pictures soon of our new inside turn curbs. They also will be a great addition to the Mini-96 and multiple combinations.

Yes, the Mini-96 is very proportional to the Mini-z and 50cm tiles. A perfect fit.

Haven't tested the smooth side. I don't like it as much, since we cut the tiles from the rough side down, so the joints look much better on the rough side.

I will send you a PM on the white pins. I notice with the small dNaNo, you really don't need to screw the tops on. The car will not push the rails up. I tested the track with Pins in and out as you can see from the pictures.

Yes, this batch of mini-96 tracks are cut the same as the 50cm standard tracks. They are not cut all at once. I set this track up tonight and all the joints matched up perfectly. I didn't need to shim one single tile.

I have some video from todays runs that I will get posted up shorty. It will give you a great view on how the car performs with the track and PN tires.