[Azimov]

If I remember right, there are 4 wires. Two from each coil. Of the four, two are colored with a dark blue or green like someone did it with a felt marker. The two darker wires hook to one connection, and the other two have their own separate connections. So, you got 4 wires and three connections I think. I'll take a look and see what I can find out about getting something for you to see.
EDIT: I just found this quote in another thread by Clint.
"you'll have to desolder all the wires, including the tiny steering wires, from the zip zap pcb and resolder all of them back onto the booster pcb.
the boards have labels next to the solder joints in tiny white letters .ie V+ V- L R F B..just make sure you solder the wires to the same functions on the donor board."
Look on your board and see if you can find these letters. The L and the R he refers to are the steering connections for those two wires I mentioned earlier. Just hook the left coil to L and so on. The two darker wires will go to a common connection around these. Take a close look at your boards and let me know if you can figure it out before I tear mine open.