|
batteries on my camera are dead so i'll just describe it.
thin strip of metal bent in a small vice in a "Z" shape. adjusted it so that the front wheels are centered and at a good height. one end has two holes drilled in it to attach to the stock mounting holes on the chassis.
took about 5 minutes.
now for the rear mount.
well, the mini-z bodies have side mounting tabs behind the doors.
well i just trimmed them down enough so that it "grabs" and secures itself between the two AAA batteries, just aft of the center battery clip on each side. works perfect. i doubt id ever drive this body with the lithiums so thats all i needed to do.
that was another 5 minutes.
i drove it around the room being very carefull not to hit anything. yes it is too nice to drive.
the body is tight enough that full speed blasts and drifts to not disturb it.
|