[Shelby_HEMI]

run the fogs off a different power source (watch batts., for example). there's a tip for that on the zipzaps site.

Add lights to your ZipZaps.

Here’s what you need to get your ZipZaps glowing!
• 2 LEDs: 80 MCD; 2.1 volts @ 20mA (RadioShack #276-351(shown) other colors available at your neighborhood RadioShack store)
• 1 CR2032 3V Lithium Battery (RadioShack #23-164)

Match the positive and negative ends of the LEDs to the appropriate side of the battery. If the lights do not come on, try switching the wires to the opposite side of the battery.

Secure the LED wires to the battery with tape.

Remove the suspension bar from the chassis.

Tape the battery onto the chassis and arrange the LEDs to their best fit.

Reattach the body top to the chassis.

To turn the LEDs off, remove tape or insert non-conductive material such as paper between the battery and wire.