|
yes it is backwards. but there is an easy fix. a full chassis skidplate. screw a piece of plastic onto the bottom using 2 of the four screws that hold the two black towers on, screws beside the switch and the 2 screws used to adjust the length and cut a hole out for the switch. then make a smaller piece that goes back just a bit past the switch and use the front screws and the middle screws for the big plate to screw the little one on. that way the switch will be protected. thats what i did at least. or you could try moving the switch.
__________________
Yellow Skyline X-MOD: AWD, Ball bearings, 4.5 tie rod & Stock springs, Stage 2 Road Race Motor, 6 Cell Mod
Silver RSX XMOD: Stock, Stage 2 Drift Motor
NEVER UNDERESTIMATE THE POWER
OF STUPID PEOPLE IN LARGE NUMBERS!
|