Iam, yes it does work, but you have to be careful, or you'll move something and the board'll be trash. I did that about 6 days ago. Luckily, a clone was willing to give up its board for the MS to live...
. By the way, I don't think MS's have the limiter in the controller anymore. Mine doesn't, and it's likely yours doesn't either. If you want major range, take out the old antenna, and swap it with a telescoping one. If you have a clone, take the controller apart, unscrew the holder, and unsolder it. Open up the MS controller. Unscrew the thing that holds in the wire antenna. Be careful, because it's gonna come flying at you. Get the antenna out, clip the screw in piece so it fits in under the spot where that slice of plastic resided, solder the antenna connector to the antenna wire (attached to a weird piece of sheetmetal) glue the plastice antenna holder down, and put the controller back together. I used a Bensu clone controller, and it unscrews, and fits like it was made for the MS.