|
I robbed a quick connect from a chassis I was using for spare parts. To get the body to fit (Supra at least), I had to cut out some of the strengthening bars on the mounting tab in the rear, so I could slide the battery pack all the way up against it. I also had to remove the light kit mounts. I then used one of the bushings and a longer screw, and stuck the bushing between the black part of the mounting tab and the body where it screws into. This gives the body enough clearance to have the heat sink on the motors, and still fit. I then hot glued the battery pack in place.
This may not work for all bodies though.
The directions for wiring it up are in the post before the diagram.
|