|
no long shaft, "it was made for it" meant that it has great torque and tons of speed. the motor is actually made for the mini-z. to keep the 4wd i made an extension of the shaft. i made a collar that fits over the little nub end of the motor and stuck a metal rod the same diameter as the regular rod in the other end. included is a picture of the first motor i did it to, it is a hyperdash 2 arm in a regular can) if you can see the little extension goes into the can a little. so that it has room i put a bearing 6X3 in the endball and the collar fits snuggly in it to keep everything centered and smooth
|