|
I got my 27Mhz S2000 Compact Char-G (Official TOMY Aussie version of the Bit Char-G) back from Micro the other day and I can only say one thing. WOOOOOW! This mod rocks! I can't say that enough. At first I put back in a 2.2 that came stock with the car when I bought it. The 2.2 with the FET mod takes off faster than my 40Mhz Compact with a perfection 3.8. I then put the perfection 3.8 in the FET modded car and I gotta say that it leaves my clone dual batt with a 2.6 for dead!
My FET modded car has the following after market mods:
FET Mod.
3.8 perfection motor
Bit Racer Soft front and rear tyres.
Crip cap (in the car) mod and longer antenna.
I run this car on polished floorboards so the soft tyres were the go. Taking a corner keeps the car on the ground. On carpet the car requires hard tyres for the front end or it will flip ( this even happened with the 2.2 stock motor!!!)
The general handling of the car is much better than ANY internal daul batt (the external daul batt mod is a waste of time, you can do wheelies and nothing else) mod due to the lighter weight and no stuffing around with raising the car's centre of gravity. (which is what dual batt mods do)
I gotta say that if you can get this mod done DO IT. Micro had my car back within 2 days, in great packaging and all the original parts. (The transistors that were replaced are useful for a techo like me, Micro gave me the option which is great.)
I will be getting all my cars modded to suit. I will also take some video showing the results of this mod, watch this space!
Excellent job micro, Kudos!
For all you techies out there (BillyP) you still might want to consider getting Micro to do the job for you. I believe he has the specialist SMD tools for this application of soldering surface mount components. I've got many different projects on the go and I have killed a fair few SMD components by over heating them, breaking etc,etc, 'cause I didn't have the right tools.
ph2t.
|