Thread: Can FETs be install on the first version Mini X ESC?
View Single Post
  #2  
Old 05-22-2003, 01:17 PM
Hooters Driver Hooters Driver is offline
TinyRC Pro
  
Join Date: May 2003
Posts: 59
There are no holes on your PCB for additional FETs but you can add FETs to the speed control. When you buy the new FETs they will come with much longer leads than the originals. If you remove the original FETs and solder them directly onto the new FETs you can then solder the new FETs onto the board. It may not be the prettiest installation but it is functional. This is the same basic way that all FET upgrades are performed on the mini-z.
Last edited by Hooters Driver; 05-22-2003 at 01:44 PM.
Reply With Quote