How Do I Fix This?
 

I know that the picture is crappy, and it's hard to see what it is. The lip that holds the heatsink down has cracked. I noticed this today when I tried to fit my broken-but-soon-to-be-replaced-R-Spec into the motor bay. When I put the R-Spec in, the heatsink would not stay down because of the crack. I would use my extra chassis, but one of the electromagnets broke! How do I fix the crack or the electromagnet (preferably the crack)? Super glue won't work because lots of presure is being put on this piece. Please help!

one of mine broke like that too...i used a peice of scotch tape to hold the
heatsink to the clip..once you put the body on..it holds very securly in place.

hope that helps.

id use clint's suggestion.

if you want a more permanent fix try epoxy. find jbweld. its like 3 or 4 bucks and will work fine.

if you want to get all into it, you can epoxy a small segment of brass tubing to the bottom of the broken piece, that'll hold for sure

I would fix the crack!

Or if you find u need to, make urself a pair of new steering coils, check the guide below for download.

http://www.tinyrc.com/forums/showthr...2&pagenumber=1