TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   Something interesting about the 35Mhz and 45Mhz (http://tinyrc.com/forums/showthread.php?t=6622)

DakarV 01-12-2003 11:57 PM

Something interesting about the 35Mhz and 45Mhz
 
I don't know if anyone posted this in the forum. I have two bit char-gs, a 35 Mhz and a 45 Mhz. My bro and I were racing and everything was fine. Until my remote, 45Mhz, took control of my bro's 35Mhz. The 35Mhz would go for a short distance will the 45Mhz would stutter. Anyone having similar problems. Is there a way to prevent this from happening?

ib311 01-13-2003 09:59 AM

Happens all the time between those and the 27-35. Try a 35 and a 49. The frequencies are 2 close. You can try adjusting the frequency thing in the controller, by moving it ever so gently in either direction until you get a different frequency. Something like 34.7 or something. I'm not quite sure how it all works.

You can seach these forums...I remember reading a few threads about it.

DakarV 01-13-2003 10:15 AM

Thanks for the reply ib311. Buying a new car, either a 27 or 49, sounds a little better.:D

hogjowlz 01-13-2003 10:21 AM

find a 57 if you can.

binaryterror 01-13-2003 10:35 AM

I run the 27 and 35 all the time with no cross over in my house (also known as the intereference zone).

The only one I ever had cross was a 45 and a 49.

hogjowlz 01-13-2003 10:42 AM

ive seen 49 control a 27. they were different brands. ive also seen two 49mhz cancel each other out and neither run while both transmitters are running.

DakarV 01-13-2003 11:00 AM

Thought I was the only one having this problem. Thanks for the replies guys.


All times are GMT -5. The time now is 05:57 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.