quick help !
 

i've located the crip cap on my bit pcb "loctite zexel"
should i take it off or not ??

i've read that in QFM about removing the pcb CC :

"People have posted mixed results from this mod, with increases in range varying from just a half foot gain to a maximum range of twenty feet!"

should i take it off or not ???

fast guys ... my bit is opened and lying on the desk, waiting for your suggestions

I haven't done that mod but if you're feeling lucky, go for it.

edit: Ask yourself this. Does the car have enough range for you now? If you said no, then try the mod out. If you said yes, leave it alone.

it has like 30ft range .. i want more :D
just plugged my solder .. i'll take it off

I have the same car and I removed the CC from the PCB. With removing the CC and adding a new car antenna, I now get 40+ feet inside. Good luck and may the force be with you.

i want to change my bit antenna, should i use copper wire ?

my range indoor like 25 feet .. out door is good as well, but sometimes it stutter after 10 feets but the reverse still working probably, do you know why ?

Get some solid core cat5 cable and cut it up. Should be pretty cheap at home depot