Cooper Wires Loose!!!
 

:( Hey I was Wondering Does any one have a Diagram about how to Solder on the cooper wires inside the Zip Zaps?!?!?!? I WAs trying to mod it and then i realized that the Brown Cooper wires came off the Chip! i dont know witch ones go where! I Cant turn or Any thing now! i can only go forward and backwards buts its still slow with my NOS motar! Plz Help! i Need a Diagram

I don't have a diagram but here goes pretty simple.

Each steering coil has 2 wires coming off of it.
1 wire from each coil solders together with the red pos. wire AT the PCB.

The 2 remaining wires (one from each coil) gets soldered to its respected spot on the PCB with a L or R.

I strongly recommend using tweezers to handle the wires.

OH I see Soo there should be 2 Copper wires from Each of the side like one on the left and one of the right. So it should be stuck with the red wire? Does it Matter Witch one i choose from the Left and the right? since there are 2 on each side

Nope doeesn't matter

Oh Ok Ill Try it Out And ill Reply if it Helped me Or Not Thx anyways