TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   350Z issue (http://tinyrc.com/forums/showthread.php?t=3917)

TheEditor 11-26-2002 08:07 PM

350Z issue
 
Ok, I was playing around with the tires on my 350Z and I can't remember which are the stock ones. I have a set of tires with small 'Z' on them, but I am not sure if they go to the 350Z or the Atomic Z-Car I have. Can someone check the stock tires on their 350Z and let me know if they have a 'Z' on them. Only the people that still have stocks on the car need reply.

Thanks

TeamSuxor 11-26-2002 08:20 PM

The front tires of you 350 should not properly fit the Z-car. They'll be very loose. I haven't messed with the rear tires, but that should help.

In the end, does it really matter?

TheEditor 11-26-2002 08:27 PM

But the question remains, do the stock tires from your Z have two Z''s on them, equidistant from each other on the outer sidewall?

DriveWRX 11-26-2002 09:37 PM

I don't have a 350Z :( , but I do have an Atomic Z-Car.

My Z-Car has the little "Z" on all 4 tires. I assume that the 350Z has stock Bit tires which shouldn't be marked at all.

Hope this helps... ;)

foofinator 11-26-2002 09:42 PM

My 350Z has no Z's on its wheels. It must be the Z cars tires.

Yaksha 11-26-2002 10:53 PM

Nope, no "Z's" on my Fairlady.

TheEditor 11-27-2002 07:55 AM

Thanks for the responses folks. Just wanted to make sure I had the correct set of tires.


All times are GMT -5. The time now is 07:41 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.