Microsizers parts?
 

Hi, what Microsizers parts will fit on the ZipZaps cars? I read in another post that the motors can be used but are a slighty different size. What about the suspension arms, gears, wheels and tires? (and anything else I missed)

thanks!
h00ch

I had a microsizer for a while but then my dog chewed it up but i still have the parts. I tried the motors and they work. the gears and axles work. the batteries dont though. hope this helps!

Hey

The battery should have worked but it would not have too much power. MS have only 50mah batteries I used my battery to dual cell a friends bit

Shane

i tried that but it was too small, at least for my zz. maybe if you solder a wire from the + or - side and connect it to the batterie it would work but hey my car is bad enough already right now.

grand rc when you are dual celling a midro car you conect the + on one battery to the - on the other. then the open + connects to the + terminal on the car and the open - connects to the - terminal

open: no wire connected

Shane

i used to have a microsizers to i had a 350z and i custom made a spoiler and race stripes but i lost it and i tried the motors on a zip zaps and they work but not as well as they normal zip zaps motors.