TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   XMODS Parts and Hop-Ups (http://tinyrc.com/forums/forumdisplay.php?f=126)
-   -   the drift kit (http://tinyrc.com/forums/showthread.php?t=20302)

wacko_boy 10-10-2004 04:58 AM

the drift kit
 
hey, who has the drift kit? is it goo? i might but it but for ten bucks.....

Phred168 10-10-2004 09:38 PM

I dunno about the 10 bucks part, but it's not a bad kit. The tires are ABS plastic, if I'm not mistaken. It makes it pretty easy to drift, but be prepared to counter steer a good bit. I can drift on carpet w/ it. I got a decent drift all the way across the length of my garage( ~15 feet) without too much effort. It is a bit of the cheap way out, but I'd recommend it if you havent really learned how to use it yet. Tile/hardwood/probably laminate flooring are out, theyre too slick. Carpet, without a boost from your foot, just allows freewheeling. Concrete is the recommended surface from me.

wacko_boy 10-10-2004 10:55 PM

hmm...
thanks

jamgunner 10-11-2004 12:03 AM

i found that if you just wanna drift on some hardware floors that taping the tires works just fine. you can use black electrical tape or if you want to really slide use clear scotch tape.

wacko_boy 10-12-2004 04:09 AM

http://www.customxmodsparts.com/chrondrift.jpg

noticed that RS was gonna sell the drift kit for 7.99. then they changed it to 9.99

anthonyb45 10-12-2004 08:05 PM

my freind got it it works pretty well and look good i like the rims. u can slide out some time but other than that its nice.:D

SHIFT_DRIFT 10-12-2004 08:24 PM

I'd say it's pretty pointless.
I've made my own "drift wheels" before these came out.

wacko_boy 10-14-2004 02:21 AM

okay i got it.. but its hard.... dont look anything like drifting, more like spin out

Phred168 10-14-2004 06:54 PM

If you dont have AWD, that's why. Even the instructions say you should have AWD to use it ;) The ass end just farts out and you're left with the front tires still gripping.

SHIFT_DRIFT 10-14-2004 09:44 PM

I made my own set a few months ago by dipping the tires in super glue and letting it dry.
Dosn't last as long as PVC or ABS but does a good job.

inott40 10-22-2004 03:17 PM

i can drift my supra pritty well on hardwood, all i have is a spinbrush/rs stage 2 drift motor, 6-cell, and awd. or i may just be a good driver. :)

spinitsidewayz! 10-25-2004 01:26 AM

i might just get this kit for the wheels lol.. how slippery/grippy are these tires? i wanna try them out as fronts on my rwd drifter. (oversteer/understeer technique) basically understeers, but oversteers with throttle!

are the wheels any different from the normal ones?

SHIFT_DRIFT 10-25-2004 10:11 AM

You can get those 5Zigen wheels in the Issue #2 wheel kit.
The tires are ABS plastic last long, but are only good for slow show drifting. They kinda tend to slide in straights. (keep the throttle low)

allaboutav 10-25-2004 01:42 PM

Drift very realistically on RCP tracks.
 
This kit is awesome on either side of a RCP track. RCP tracks, for those that don't know, have two sides, one for drifting and one for more traction.

Both sides work well, but the "drift" side of the track has a very realistic feel to it with this set of tires and wheels. However they are too slick if you have upgraded your car past the radio shack upgrades. :)

AllAboutAV
OKCXmods Racing League
www.okcxmods.com
www.okcxmods.com/forum

SHIFT_DRIFT 10-27-2004 05:20 PM

I like the way you stole Tamiya's beginner's r/c guide. :)


All times are GMT -5. The time now is 05:28 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.