ES-01 hookup problem
 

Hi, I was gifted an airtronics ES-01 ESC and want to run it on a backup car, but I have no idea how to connect it to the Rx. Instead of the standard 3 pin connector, it has two of them, but with 2 and 1 active pins respectively. See the pic here:
http://airtronics.net/images/ES-01.gif
For reference, I'm going to use this on the futaba R142JE Rx.

Thanks for the help.

I took to single (blue) Wire out of it's plug, and stuck it in the other plug, works fine! check the red & black polarity is the same as the rest of your equipment as well, just in case..

will try tonight, thanks.