TinyRC.com - Which quick disconnects would I need for dual AAA holder?

TinyRC.com (http://tinyrc.com/forums/index.php)

- XMODS Mods and Projects (http://tinyrc.com/forums/forumdisplay.php?f=127)

- - Which quick disconnects would I need for dual AAA holder? (http://tinyrc.com/forums/showthread.php?t=18099)

newbitowner

02-07-2004 04:24 PM

Which quick disconnects would I need for dual AAA holder?

quick disconnects

I need this b/c my wiring keeps breaking.

RC 2NR

02-07-2004 05:21 PM

These ones are the ones I got. They work best if you strip off the plastic with a soldering iron and use some heat shrink tube in place of the it.

newbitowner

02-07-2004 05:27 PM

what gauge is the wiring?

boxcrash

02-07-2004 11:18 PM

I went to

I went to LHS and got some connectors for Airplane stuffs, they had a length of wire and a male and female connector on them.
They where made to be an extension piece.

I cut, spliced and soldered them in and used a little shrink wrap.

RC 2NR

02-08-2004 09:08 AM

Quote:

Originally posted by newbitowner
what gauge is the wiring?

I'm using 20 gauge, I think. But they'll work with 18-22 gauge.

McBadWish

02-11-2004 05:51 PM

These Dean connectors look like they would work well.
http://www2.towerhobbies.com/cgi-bin...?&I=LXDKA2&P=0

bob256

02-11-2004 09:36 PM

Like the post above said, Deans connector work best. theyt have the lowest resistance and some have failsafe connections so you can only wire the battery in correct polarity.

All times are GMT -5. The time now is 03:32 PM.