Different bodies!
 

i registered so i could see a picture on the forums hehe

but anyway i was searching for 1:28 bodies and i don't know if this was posted, but

http://www.etamiya.com/catalog/defau...ort=3a&&page=2

fairlady z, wrx, evo VII to name a few. and there all 1:28 so i would imagine they could be modded to fit on an xmod

again apologies if it was already posted

It hasn't been posted from what I believe and those are some sweet bodies!! I escpecially like that Z.

this one is mostly 1:24. not sure if you can use it but it has a lot of different manufacturers. suabru, mitsubishi, etc.

http://www.buy-model.com/itemgroup.p...Id=1&GroupId=1

sorry if this was posted already

this pic is from the first one, but look at the driveshafts and where they connect to the wheels. do ou think it would fit?? btw, the bodys will have samll holes in them in front of the front wheel well and behind the rear wheel well. here is the pic...

EDIT: if you look at this http://www.etamiya.com/catalog/produ...roducts_id=918 pinoin gears for 130 motors!!

Yeah, those bodies are preety cool. You can only use the pinons with the drift idler gear (or planatary or wateva). Nice find though.:)

didn't want to spam the board with something already posted

http://www.hpiracing.com/bodies/body-mi.htm

rsx body is about 140 mm long so i would imagine modding couldfit these bodies on pretty nicely

http://www.hpiracing.com

main page

Afraid not, these are 1/18 scale the wheelbase is 140mm not the overall length of the car.

I forgat about checking for Mini4wd hopups, some of the wheels look cool!

that looks pretty good. the chassis could be extended a bit to center the front wheels in the wheel wells though

Re: impreza body
 

where do they sell those? i've seen a wrx similar to that in a different post.