Tri cell mod
 

This mod works best if its in a bb truck body. I just wanna clear that up before proceeding.

Materials/Tools needed:
3 of the some type of Bit/Zip/MS batterys
Wire
Electrical tape
Soldering iron/pen/gun
Solder
something to remove a battery (EG:Smal screwdriver,guitar pick, and so on)

See link below for diagrams

http://pic7.picturetrail.com/VOL206/...4/30077300.jpg

Step 1: Solder a wire between the - end of cell 2 to the + end of cell 3
Step 2: Solder a wire to the + end of cell 2
Step 3: Solder a wire to the - end of cell 3
Step 4: Tape (or solder then cover with tape for extra hold) the wire from the + end of cell 2 to the - end of cell 1. Make shure the whole - end of cell 1 is covered with tape.
Step 5: Slide the cell 1 into the battery campartment CAREFULLY.
Step 6: Use a slim screwdriver or something real skinny and hard to push the wire coming off of the - end of cell 3 in between the tape and the - tab for the battery compartment.
Step 7: Modify your remote as mentioned here http://bitpimps.lixlink.com/pages/ar...?id=17&catId=1
Step 8: Drive lick a maniac!

OK ABUYEBUYE

the cells hould be arranged like this (i cant get pix of it now cuz im replacing some cells)



oh yeah, where can i get photo shop? as u see i really neeed it

i think you could do a tri cell with the Bb by putting the internal dual cell then putting another battery where the cab is, just remove the pcb cover. I dont know if it'll work, seeing as how i do not have a Bb.

You could do that.