I destroyed my crappy Clone...what do I do now?
 

Basically, trying to fix my steering Spring I recked the right coil then I made my own coil then all the wires popped off, All That remains is a 2.6 a shell which I accidentaly put a hole in while soldering, PCB, a Controller for a 42, a blue battery I got from my good clone but was crappy so I put my yellow one into my good one and a whole lot of wires...what MOD should I do?...I have tires too...also one other question, What's the mA / Voltage for these batteries? Just a question....

Get a Thunder Charger clone for $5 at Big Lots

Do a same-size wheel mod on the good one using the parts from the bad one. Just be careful that your bad luck doesn't follow you from project to project.

the best word in the world: PARTS unless you wanna take the time and fix all the little problems with it it's much easyer to turn it into an organ doner.:D

What he said.
It's painful to lose a car, but it's parts can make a mediocre car rock in the future.

I spent 5 hours trying to solder it together b4 I noticed I forgot to clamp it :(, Thanx for the advice everybody...so what's the Voltage for the Battery?