TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   2 speed (http://tinyrc.com/forums/showthread.php?t=11805)

SSRay 06-21-2003 07:29 PM

2 speed
 
Do two speed cars go half of their full speed...then when you press the button it goes full speed?

Murcielago659 06-21-2003 07:31 PM

That's the way my pro works. It's not any faster than say a sport, but it goes slower off the boost.

SSRay 06-21-2003 08:10 PM

oh ok...i have a regular microsizer..just wondering how the 2 speed works. thanks

Char-g Ace 06-23-2003 11:00 PM

My 2 speed goes a lot faster than my sport. but that might have somthing to do with the dual cell. LOL

2G2SILVERSTRAT 06-24-2003 01:00 AM

mine stays even with my girls sport then with the boost button "bye bye:" its hauls a55

MicroSpeed 06-24-2003 11:44 AM

My PRO only goes 1/2 speed without boost but with it is much faster. Then again, the only comparison was with my friends standard MS, which he got last year, so it problably not up to spec anyway. If you are wondering which one to buy, get the PRO anyway, because it helps alot for tech-tracks. unboosted for tight turns, boosted for acceleration and top end on straits.

David

hogjowlz 06-24-2003 11:49 AM

pros get horrible range

MicroSpeed 06-24-2003 11:50 AM

oh and one other thing. A MS PRO has a 2.2 moter and a Sport has a 1.6
Hopefully that will help you with comparisons.
in other words, the PRO has a motor that when in boosted mode is at least 1-3/8 faster than a sport

MicroSpeed 06-24-2003 11:55 AM

I agree, the antenna an PRO's is quite a bit shorter than on standards. what i did is i went under the pcb board, untied the knot in the antenna and drilled a hole in the front of the body for it to come out, which made the antenna about 1.5 inches longer, and improved range by 5-10 feet

2G2SILVERSTRAT 06-24-2003 01:04 PM

UNTYING THE KNOT WILL GIVE IT MORE RANGE i got an extra 5 feet........and for spme reason the 49mhz pro has better range the the 27mhz pro....go figure

MicroSpeed 06-24-2003 02:05 PM

good thing ive got the 49:D

hogjowlz 06-24-2003 02:36 PM

thats bs. pros(at least the two i got) have very crappy range even after trying a few different types of wire and boosting the signal on the tx. the only way to substancially increase range on a microsizer is to change the pcb.

2G2SILVERSTRAT 06-25-2003 12:03 AM

your b.s. is pure b.s. ive had about 5 microsizers 3 were 27mhz and 2 were 49's .the 49's are clearly higher quality then the 27's and untying the knot does add about 5 feet max range.... on the 49's ..it only adds 1-2 feet on the 27's/ sorry but facts are facts.regardless how many post you have.....

hogjowlz 06-25-2003 03:50 PM

well maybe you got special "magical bits" but i doubt it.

2G2SILVERSTRAT 06-25-2003 04:54 PM

i just bought another 49mhz pro to test my theory .and i was correct again about only 4 addition feet this time after untying th knot.....my bad if you think im being an A55 im not trying to be just sharing my experiences.. cool?


All times are GMT -5. The time now is 03:51 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.