TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G Parts and Hop-Ups (http://tinyrc.com/forums/forumdisplay.php?f=11)
-   -   R-Spec II question (http://tinyrc.com/forums/showthread.php?t=15434)

Rotary Freak 11-23-2003 03:32 AM

R-Spec II question
 
I'm considering a purchase of one of these engines, but I have a few questions, one: It seems to be a common motor, so is it just that good? Does it offer decent handlng and not alot of flipping? Two: Does it outperform a ZZ NX? And three: Does it fit in a BCG engine bay good? I have a broken tab from having to cram the heatsink mount down in there, and even when I did..the thing still popped my ZZ engine out of place. Even with about a pound of duck tape on it..the thing still came undone, so, will it be less of a ZZ engine size and more of a slightly smaller (not by much) BCG size. I believe thats all I've got, thanks.

jcloughley 03-26-2004 10:30 PM

ZZ 3.4 mod
 
I had the same problem putting a ZZ 3.4 in my bit. Luckily I didn't break my chassis trying to get the clip to stay. It just wouldn't stay though (it would for a moment, then I would hit a bump and the clip would jump).

I ended up using sandpaper to wear down the metal bump at the end of the motor in order for it to fit in my bit. All you need is a bit of metal to touch for it to work.

It's been in my bit for weeks without a problem.

I don't know about the RSpec. I actually buy my 3.4k motors from another supplier. They are the same as the ZZ 3.4 (performance is identical if not quicker) and I don't have to buy the initial D tuner pack or the 2F2F tuner pack or now the boss tuner pack when all I want is the motor.

If you want to buy one of my motors, I'd sell it for $6US.

J


All times are GMT -5. The time now is 02:30 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.