Tri cell mod.
Ok y'all heres my home maid try cell mod.
Materials/Tools needed: 3 of the some type of Bit/Zip/MS batterys Wire Electrical tape Soldering iron/pen/gun Solder something to remove a battery (EG:Smal screwdriver,guitar pick, and so on) See link below for diagrams http://pic7.picturetrail.com/VOL206/...4/30077300.jpg Step 1: Solder a wire between the - end of cell 2 to the + end of cell 3 Step 2: Solder a wire to the + end of cell 2 Step 3: Solder a wire to the - end of cell 3 Step 4: Tape (or solder then cover with tape for extra hold) the wire from the + end of cell 2 to the - end of cell 1. Make shure the whole - end of cell 1 is covered with tape. Step 5: Slide the cell 1 into the battery campartment CAREFULLY. Step 6: Use a slim screwdriver or something real skinny and hard to push the wire coming off of the - end of cell 3 in between the tape and the - tab for the battery compartment. Step 7: Modify your remote as mentioned here http://bitpimps.lixlink.com/pages/ar...?id=17&catId=1 Step 8: Drive liKE a maniac! OK ABUYEBUYE |
Great Trick.
thanks for sharing a trick tell me first it is not a danger and generate a any type of problem? I tried the to see the the your diagram but it is not open and fire a error so check again the link properly. |
All times are GMT -5. The time now is 11:46 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.