TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   XMODS Mods and Projects (http://tinyrc.com/forums/forumdisplay.php?f=127)
-   -   Nos Button! (http://tinyrc.com/forums/showthread.php?t=14963)

raven5x 11-18-2003 10:18 AM

If you guys don't know where to get a tact switch or don't know what it is- You can get most of them in TVs. Most of the time they're located on the front-side of TV circut boards. You can just take an old TV you found behind Best Buy and solder out the switch.

Just a thought.

Chettaman 11-18-2003 12:50 PM

NOS button????????
 
The factor of where to get the switch is not the problem. I can get a switch from radio shack. What I'm asking is how does this all work and what else has to be done besides just wiring the switch if there is anything else? Please post more pics or drawings. Thanks.

godsmistake 11-18-2003 01:23 PM

Basically the "nos button" just enables you to bypass the hi/lo throttle trim switch with your thumb. I didn't really do anything special to the car. It's still a cool effect when you drive around in low trim, and then w/out having to touch the trim switch on top, it's like you have an instant increase in speed.

colin4371 11-18-2003 10:09 PM

do you have to hold that button down to keep it in hi? or do you just press it and let go.

i have a tact switch, but it has 4 prong thingys coming out the bottom, as opposed to the2 in your illustration. which should i use?

godsmistake 11-19-2003 12:27 AM

yeah, u have to hold the switch in for the effect. thats how i wanted it, you could use a regular on/off switch if you want.
I'm not sure about the 4 contact tact's i suppose that 2 of them are for "normally open" and the others are for "normally closed"
circuits. you want the "normally open" contacts in this case. you can test the contact w/ a multimeter...RS has a pocket sized one for like 25 bucks that has a continuity tester setting which u can use to check the switch among other things. I highly suggest u invest in one...very very useful.

merc 11-19-2003 06:19 AM

Very cool idea. I'll have to do that when I do the 6cell mod.

rsxmods 11-19-2003 09:14 AM

this mod is great but now i have my remote all apart and im confused:confused: ... so cud u tell me what a tact switch is plz and this mod jus gives you boost until you let go of the button right ?? and 1 more question do you mount the wires right to the side of the th. trim or on the inside??

raven5x 11-19-2003 10:10 AM

Re: Nos Button!
 
Quote:

Originally posted by godsmistake
I conveniently mounted a mini tact switch on the back of the controller where I can press it w/my thumb. Then I wired it into the throttle trim switch. Basically I can have my trim set on low for more control and stable turns, but "punch it" in the straight-aways for top speed advantage.
Maybe you should post some pics of your controller dismantled because there are alot of ppl asking questions on how it works.

For the ppl who were looking for a diagram
- -=look on page 1=-
of this thread.

rsxmods 11-19-2003 10:53 AM

srry just finished puttin it together took me 2 hours to figure it out... it really complicated on the inside tons of parts

Spike88DS 01-19-2004 10:17 AM

1 Attachment(s)
Quote:

Originally posted by raven5x
If you guys don't know where to get a tact switch or don't know what it is- You can get most of them in TVs. Most of the time they're located on the front-side of TV circut boards. You can just take an old TV you found behind Best Buy and solder out the switch.
could you use a momentary switch like this one

Spike88DS 01-19-2004 10:28 AM

i trying this mod and im confused :confused: i have questions like
1. with the wires i need sumthing better than using walkman wires i need details.
2. would the momentary switch work
3. How much would this cost(radio shack price)

suprafreak33 01-19-2004 06:36 PM

1 Attachment(s)
the price is between 2.99 and 3.49 here



i like this one ( it looks like my supra) (color)

xxspeednplayaxx 01-29-2004 02:08 PM

hey all, well im trying this mod, and so far i have it wired up, except im having probs to get my momentary switch to fit where i want it! (i put the hole about 1/2 inch below the st trim adjs...) well when i started to put it back together i screwed in the bored and heard two breaking sounds, i looked and their were to lil thingys that busted, for now i just put solder over their connectors to finish the curcuit, however im afaid my Tx will fry w/o these thingys they look redish in color, could some1 please help, i found to candidates from an other rc, can i just use those instead? please help i cant let her die on the table!

madpilot1 02-23-2004 09:35 PM

i put the nos button on my controller, same spot, but what a pain it was. no fun at all but once it was done it was well worth it. first thing i did was smash my front skyline body kit on a medal bench leg. oops that button has been fun tho. great idea!!


All times are GMT -5. The time now is 01:25 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.