PDA

View Full Version : MT Gear Box Prototype 3D


Sea-to-Sky
11-17-2006, 02:32 AM
Just a initial design.

Sea-to-Sky
11-17-2006, 02:33 AM
2

Sea-to-Sky
11-17-2006, 02:34 AM
3

RCdabbler
11-17-2006, 01:18 PM
LOL yeah something like this.
http://img237.imageshack.us/img237/6748/dscf0001uw7.jpghttp://img84.imageshack.us/img84/3599/dscf0003kf1.jpg

Sea-to-Sky
11-17-2006, 02:38 PM
nice! Have u finished ur project?

RCdabbler
11-17-2006, 06:19 PM
Nope, its on the back burner for a few weeks.

I'm more focused on my ZZawd right now besides I feel I have the ZZmt pretty much under control.

I hate the way I did my axles and may have to make some real ones for it.

Your design is interesting although it would be able to pull stumps with that many gears.

LastCaress
05-07-2007, 08:18 AM
I like the design. It seems rather quite sound. I'll go out on a limb here and say that it would work most definately.

Azimov
05-09-2007, 10:17 AM
I'm not sure what you are gaining with the 4 extra gears other than additional friction. There is no gearing up or down in your configuration that will provide extra torque or speed with those extra gears. Perhaps I'm missing something.

Michael.mt2k
05-09-2007, 09:33 PM
Dude you are awesome.

I don't think I'm ever gonna get back into these things.

Keep an eye out for my post down in the selling area.
I've got a few new MTs and a bunch of accessory kits, not to mention a ton and a half of stuff leftover from the MS/Zip Zap days.

chilli_mp138
05-11-2007, 11:32 PM
Azimov--

What Sea-to-Sky has not told us, I think, is that the gear sets are free to turn on the shafts. If I am correct in my assessment of his arrangement, then he achieves a good gear reduction at the end, much like the gear arrangement in the ZZSE servo.

What is not clear in my mind is the output gears. It appears that he has two small pinion gears turning eachother, which would mean the outputs to front/back and back/front, as he labels them, would be in opposite directions.

If I were building this gear box, I'd fasten or bond the final gear to the shaft (permitting the other two gears to spin freely on that shaft) and use the shaft as the output in both directions. To couple the output to small pinion gears, as he does, in part defeats the gear reduction.

Does any of this make sense?

Chilli

Azimov
05-12-2007, 04:04 AM
Yes, I think I see what you are getting at and I agree about fastening the last gear to the shaft.

fatman
08-03-2007, 03:30 PM
ull need to lower weight from that much for more power use a dremel and put holes in sections on each gear like a spoke

chilli_mp138
08-03-2007, 07:19 PM
fatman--

What is your estimated weight savings in ounces or grams by "spoking" the gears? What percentage would that be of the entire average weight of the truck?

chilli

fatman
08-06-2007, 06:04 PM
most likely .5gram of ea gear u can reduce more by cutting in lines but do not cut close 2 teeth and gear conection

chilli_mp138
08-06-2007, 10:49 PM
fatman--

Have you "spoked" your wheels?

chilli

fatman
08-07-2007, 10:32 AM
1st failed 2nd was ok

chilli_mp138
08-07-2007, 11:08 AM
fatman--

What was your gram weight reduction per wheel?

chilli

fatman
08-07-2007, 02:34 PM
gear it was orange gears with small .3gram large .5gram

chilli_mp138
08-07-2007, 04:36 PM
fatman--

No, not the gears. I was asking about the wheels without the tires mounted and without the large gear inserted in the wheel. What gram weight did you gain per wheel by "spoking" the MT wheels?

chilli

fatman
08-07-2007, 06:22 PM
bg395 but what i only spoked gears wheel spooking is coming soon it mainly for look and xtra power

chilli_mp138
08-07-2007, 10:49 PM
fatman--

Okay, I now understand. Punctuation in your text would assist me immensely. It would be helpful if you would do that for me, please.

Please tell me what you mean by "power." Are you building a crawler or a racer? What is your total gear ratio, pinion to axle? What motor are you using and what is its rpm? Could you describe what gears you are using and in what order?

If you are going for the least total vehicle weight, have you milled away the excess plastic from the chassis? Do you plan on using a custom, thin-walled car or truck body?

Will we see pictures? Do you intend to write a tutorial about your work on this project?

chilli

fatman
08-08-2007, 11:01 AM
i will try to get pics but caam broke

chilli_mp138
08-08-2007, 08:07 PM
fatman--

When might I expect answers to the detailed questions in my previous post?

chilli

fatman
08-09-2007, 08:11 AM
as soon as i get pix and more gears it is for both and nice decrative touch itll be by september like my body reductions