PDA

View Full Version : Ok got the first step in the Bit Zap project


ICH_BIN_GUT!
10-09-2002, 07:39 PM
The first step has ben acomplished.
I bought a Zip Zap

i looked under the body to see the circuitry for the first time and it looked juzt like the Bit G ones.

Now heres my next question, after I un solder the little wires I have just a lot of wires left. How do I kno which copper wires go are the left or right steering. I mean it could be reversed on the new circuit board right?

And final question- Is it a mod. that is really worth doing. Im going to have a spare bit G chasis left with no circuit board in it. What am I now going to do with it?

bitchar-gmotors
10-09-2002, 07:52 PM
ICH_BIN_GUT!

The wires are not reversed. So just take the one from the L on one board and solder it on the L on the new board. The same withe the R and the power wires.

You have to decide for yourself if it's worth it or not. I basically did it because I like the Zip Zaps bodies and wheels and I wanted a good running car that took advantage of those.

Kyle

ICH_BIN_GUT!
10-09-2002, 10:22 PM
good points...

i plan on unsoldering the wires to see what I can do.?