PDA

View Full Version : washers


xmodsupra
12-02-2003, 09:49 PM
I was thinking of using washers to take up the axel slack in the rims and make my control a little more smooth, anyone else tried this? Where did u get washers so small?

neurokinetik
12-03-2003, 07:35 AM
I've got washers both shimming my motor mount (gears were too tight for my liking) and shimming the rear wheels to help decrease the offset when using the MINI body. I had them laying around from a special CPU cooling fan kit that I wasn't using anymore.

xmodsupra
12-03-2003, 09:51 AM
slow it down at all?

TypeZer0
12-03-2003, 10:34 AM
home depot or lowe's

if it only rubs against teh bearing and not the plastic that holds the bearing, it shouldnt' slow down

xmodsupra
12-03-2003, 10:51 AM
cool, now i gotta find washers.

digiman32
12-03-2003, 03:41 PM
Radio Shack has a assorted pack of washers that has the right size in it. They also have nuts that are the right size too, but you will have to the washers with them or they screw down too far. Look in the back of RS where the cabinets are with all the switches, resistors, capacitors..etc are, you will find both washers and nuts there.

TypeZer0
12-03-2003, 05:46 PM
http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&product%5Fid=64-3018 found these, size 4-40. how do you read that size number?

this too: http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&product%5Fid=64-3017 size 2-56. i'm gonna take a stab at this but is the first number the inner diameter in mm? gotta take a look at my RS later

aero528
12-03-2003, 08:28 PM
if you got a big enough whaser then you could make it kinda look like a brake. dont know if that would look good.